MOOSE Z950 Instrukcja Użytkownika Pobierz pdf (Strona 49)

Master User Code (Master User Authorization Code): A code which functions

identically to the User Codes; also may be used to enter the programming mode.

Perimeter: The first line of defense. Consists of one or more zones which detect

intrusion through doors and windows.

Program: To set the operating characteristics of the main system electronics such

as the code which is used to arm and disarm.

Ready: The system is ready to be armed.

Remote Programming: The ability to service the system from a remote location

(specified by your security company representative) with the aid of a computer.

Reset Key: The (*) key. Used to clear improper numeric entries and to silence the

control station sounder.

Sensors: Devices that detect violations and report such conditions to the control

panel. Sensors include door and window contacts or any device used to inform the

control of a particular condition.

Shunt: See "Bypass."

Supervisory Trouble: Your installer may have defined one or more of your controls'

zones for supervisory/trouble condition indication. (All Fire zones are automatically

supervisory/trouble zones). If a wire breaks on supervisory/trouble Fire zone, the

control station sounder will beep continuously to alert you of the problem. Pressing

the Reset (*) key will silence the control station sounder. In some cases, burglar

zones may be also defined as such to indicate a broken wire when the system is

disarmed. An example of this would be for a store with alarm foil protecting the

glass. If the foil is cut during store hours, the owner will be alerted and not have to

wait until closing time to find out that service is required.

Twenty Four (24) Hour Zone: A zone that is permanently active 24 hours a day such

as a FIRE zone.

User Code (User Authorization Code): A code which is used to arm and disarm the

system.

Zone: The areas of protection represented by zone indicators.

2 User's Manual

1 2 ... 44 45 46 47 48 49 50 51

Brak uwag

MOOSE Z950 Instrukcja Użytkownika Strona 49